Foxconn富士康验厂工程服务评估

3  Foxconn富士康验厂工程服务评估 / Engineering Service   
 3.1.1 针对新材料，是否有技术发展方向存在？ Does a technology roadmap for new base material  exist?
 3.1.2 针对新设备，是否有技术发展方向存在？ Does a technology roadmap for new equipment exist?
 3.1.3 针对新工艺，是否有技术发展方向存在？Does a technology roadmap for new technics exist?
 3.1.4 是否有足够的分析验証机制来适应新材料? Is there an adequate  mechanism branch to analyse and verify  the new material ?
 3.1.5 是否有足够的分析验証机制来适应新设备? Is there an adequate  mechanism branch to analyse and verify  the new equipment ?
 3.1.6 是否有足够的分析验証机制来适应新工艺? Is there an adequate  mechanism branch to analyse and verify  the new technics ?
 3.1.7 是否有合理的机制来确认生产工程和制造工程的能力(比如培训记录，教育背景或经验等) Is there any branch  verify the capability for production engineering and manufatureing engineering (such as training record and educational background or  experience etc.,)
 3.1.8 是否有合理的样品试产流程并被执行和验証? Is there a proper procedure for sample trial run and be followed?
 3.1.9 是否具备新产品的产出标准作业规范的能力？Do you have the capability to create your own work Instructions for new projects? 
 3.1.10 是否有系统的流程设备技术能力满足客户产品要求?有无相应的文件编号? In order to satisfy the customer , is there system to define the capability of process and equipment ?How about the file NO?
 3.1.11 关于具体的每项新物料， 新设备，新生产线，新工艺的认可过程/规范等是否有文件保存并编号? Is there  documented procedure for new material ,new machine,new production line, new technics?
 3.1.12 是否有协助客户参与产品设计同时提出建设性建议并被客户采纳?Can you join in customer's design and advice been accepted by customer?
 3.1.13 是否有计划地或按客户需求对客户进行知识培训?Do you provide component knowledge training by your schedule or by customer request? 
 3.1.14 能否及时提供足够的零组件样品给客户用以零件承认和环保要求测试,可靠性测试? Can you submit the adequate free sample to customer in time to test (ie: New component approve, XRF test) 
 3.1.15 能否及时提供合适的相关文件资料给客户? (如：RoHS 符合性文件，测试报告，材质証明等) Can you submit the relevant document or report to customer in time? (ie: RoHS compliance document, test report, material certification, etc.)
 3.1.16 是否有现场研发、设计工具或治具的能力 (冲压、钻孔、成型、固定、自动操作) Do you have the capability to design and manufacture tool and fixture on site?  (Stamping, punching, forming, fixtures and automation)
 3.1.17 是否有现场维修、改善工具和治具的能力？Do you have the capability of tool and fixture repair and upgrade on site?　
 3.1.18 是否有能力测量和监控设备？（提供ＧＲＲ目标）Do you have the capability to measure and monitor equipments  (Provide GRR targets)?
 3.1.19 有无专业的工程师做失效分析？Are there special engineers for failure analysis?　
 3.1.20 能否积极协助客户进行产品失效分析并及时提交分析与改善报告? Can you be active to support customer on product failure analysis and submit prompt FA / CA report to customer?
 3.1.21 有无产品出售后之不良分析程序(RMA 规范) ?Is there RMA criterion?
 3.1.22 ECN/PCN是否描述详细，如变更内容，变更原因等?  Do you make detail ECN/PCN when need ?
 3.1.23 ECN/PCN时相关部门人员是否了解及作对应措施?  Does correlative worker know about the ECN/PCN in time and take messure ?
 3.1.24 制造命令的变更是否有流程定义? 如何定义？How do you define the ECN/PCN ?
 3.1.25 ECN和PCN变更是否有及时通知客户知晓？Do you send ECN/PCN to costomer in time ?